Skip to main content

Posts tagged with 'N1QL'

This is a repost that originally appeared on the Couchbase Blog: Moving from SQL Server to Couchbase Part 1: Data Modeling.

In this series of blog posts, I’m going to lay out the considerations when moving to a document database when you have a relational background. Specifically, Microsoft SQL Server as compared to Couchbase Server.

In three parts, I’m going to cover:

  • Data modeling (this blog post)

  • The data itself

  • Applications using the data

The goal is to lay down some general guidelines that you can apply to your application planning and design.

If you would like to follow along, I’ve created an application that demonstrates Couchbase and SQL Server side-by-side. Get the source code from GitHub, and make sure to download a developer preview of Couchbase Server.

Why would I do this?

Before we get started, I want to spend a little bit of time on motivation. There are 3 main reasons why one might consider using a document data store instead of (or in addition to) a relational database. Your motivation may be one or all three:

  • Speed: Couchbase Server uses a memory-first architecture which can provide a great speed boost as compared to a relational databases

  • Scalability: Couchbase Server is a distributed database, which allows you to scale out (and scale back in) capacity by just racking up commodity hardware. Built-in Couchbase features like auto-sharding, replication, load balancing make scaling a lot smoother and easier than relational databases.

  • Flexibility: Some data fits nicely in a relational model, but some data can benefit from the flexibility of using JSON. Unlike SQL Server, schema maintenance is no longer an issue. With JSON: the schema bends as you need it to.

For these reasons and others, Gannett switched from SQL Server to Couchbase Server. If you are considering this, definitely check out Gannett’s full presentation.

It should be noted that document databases and relational databases can be complimentary. Your application may be best served by one, the other, or a combination of both. In many cases, it simply is not possible to completely remove relational databases from your design, but a document database like Couchbase Server can still bring the above benefits to your software. The rest of this blog series will assume you have a SQL Server background and are either replacing, supplimenting, or starting a new greenfield project using Couchbase.

The ease or difficulty of transitioning an existing application varies widely based on a number of factors. In some cases it may be extremely easy; in some cases it will be time-consuming and difficult; in some (shrinking number of) cases it may not even be a good idea.

Understanding the differences

The first step is to understand how data is modeled in a document database. In a relational database, data is typically stored flat in a table and it is given structure with primary and foreign keys. As a simple example, let’s consider a relational database for a web site that has a shopping cart as well as social media features. (In this example, those features are unrelated to keep things simple).

Relational database example diagram

In a document database, data is stored as keys and values. A Couchbase bucket contains documents; each document has a unique key and a JSON value. There are no foreign keys (or, more accurately, there are no foreign key constraints).

Here’s a high-level comparison of SQL Server features/naming as compared to Couchbase:

Table 1. SQL Server compared to Couchbase
SQL ServerCouchbase Server

Server

Cluster

Database

Bucket

Row(s) from table(s)

Document

Column

JSON key/value

Primary Key

Document Key

These comparisons are a metaphorical starting point. Looking at that table, it might be tempting to take a simplistic approach. "I have 5 tables, therefore I’ll just create 5 different types of documents, with one document per row." This is the equivalent of literally translating a written language. The approach may work sometimes, but it doesn’t take into account the full power of a document database that uses JSON. Just as a literal translation of a written language doesn’t take into account cultural context, idioms, and historical context.

Because of the flexibility of JSON, the data in a document database can be structured more like a domain object in your application. Therefore you don’t have an impedence mismatch that is often addressed by OR/M tools like Entity Framework and NHibernate.

There are two main approaches you can use when modeling data in Couchbase that we will examine further:

  • Denormalization - Instead of splitting data between tables using foreign keys, group concepts together into a single document.

  • Referential - Concepts are given their own documents, but reference other documents using the document key.

Denormalization example

Let’s consider the "shopping cart" entity.

To represent this in a relational database would likely require two tables: a ShoppingCart table and a ShoppingCartItem table with a foreign key to a row in ShoppingCart.

When creating the model for a document database, the decision has to be made whether to continue modeling this as two separate entities (e.g. a Shopping Cart document and corresponding Shopping Cart Item documents) or whether to "denormalize" and combine a row from ShoppingCart and row(s) from ShoppingCartItem into a single document to represent a shopping cart.

In Couchbase, using a denormalization strategy, a shopping cart and the items in it would be represented by a single document.

{
  "user": "mgroves",
  "dateCreated": "2017-02-02T15:28:11.0208157-05:00",
  "items": [
    {
      "name": "BB-8 Sphero",
      "price": 80.18,
      "quantity": 1
    },
    {
      "name": "Shopkins Season 5",
      "price": 59.99,
      "quantity": 2
    }
  ],
  "type": "ShoppingCart"
}

Notice that the relationship between the items and the shopping cart is now implicit to being contained in the same document. No more need for an ID on the items to represent a relationship.

In C#, you would likely define ShoppingCart and Item classes to model this data:

public class ShoppingCart
{
    public Guid Id { get; set; }
    public string User { get; set; }
    public DateTime DateCreated { get; set; }
    public List<Item> Items { get; set; }
}

public class Item
{
    public Guid Id { get; set; }    // necessary for SQL Server, not for Couchbase
    public string Name { get; set; }
    public decimal Price { get; set; }
    public int Quantity { get; set; }
}

These classes would still make sense with Couchbase, so you can reuse them or design them this way. But with a relational database, this design does not match up in a direct way.

Hence the need for OR/Ms like NHibernate or Entity Framework. The way the above model can be mapped to a relational database is represented in Entity Framework* like this:

public class ShoppingCartMap : EntityTypeConfiguration<ShoppingCart>
{
    public ShoppingCartMap()
    {
        this.HasKey(m => m.Id);

        this.ToTable("ShoppingCart");
        this.Property(m => m.User);
        this.Property(m => m.DateCreated);
        this.HasMany(m => m.Items)
            .WithOptional()
            .HasForeignKey(m => m.ShoppingCartId);
    }
}

public class ShoppingCartItemMap : EntityTypeConfiguration<Item>
{
    public ShoppingCartItemMap()
    {
        this.HasKey(m => m.Id);

        this.ToTable("ShoppingCartItems");
        this.Property(m => m.Name);
        this.Property(m => m.Price);
        this.Property(m => m.Quantity);
    }
}

*Other OR/Ms will have similar mappings

Based on these mappings and an analysis of the use cases, I could decide that it would be modeled as a single document in Couchbase. ShoppingCartItemMap only exists so that the OR/M knows how to populate the Items property in ShoppingCart. Also, it’s unlikely that the application will be doing reads of the shopping cart without also needing to read the items.

In a later post, OR/Ms will be discussed further, but for now I can say that the ShoppingCartMap and ShoppingCartItemMap classes are not necessary when using Couchbase, and the Id field from Item isn’t necessary. In fact, the Couchbase .NET SDK can directly populate a ShoppingCart object without an OR/M in a single line of code:

public ShoppingCart GetCartById(Guid id)
{
    return _bucket.Get<ShoppingCart>(id.ToString()).Value;
}

This isn’t to say that using Couchbase will always result in shorter, easier to read code. But for certain use cases, it can definitely have an impact.

Referential example

It’s not always possible or optimal to denormalize relationships like the ShoppingCart example. In many cases, a document will need to reference another document. Depending on how your application expects to do reads and writes, you may want to keep your model in separate documents by using referencing.

Let’s look at an example where referencing might be the best approach. Suppose your application has some social media elements. Users can have friends, and users can post text updates.

One way to model this:

  • Users as individual documents

  • Updates as individual documents that reference a user

  • Friends as an array of keys within a user document

With two users, two updates, we would have 4 documents in Couchbase that look like this:

[
  // Key: "7fc5503f-2092-4bac-8c33-65ef5b388f4b"
  {
    "friends": [
      "c5f05561-9fbf-4ab0-b68f-e392267c0703"
    ],
    "name": "Matt Groves",
    "type": "User"
  },

  // Key: "c5f05561-9fbf-4ab0-b68f-e392267c0703"
  {
    "friends": [ ],
    "name": "Nic Raboy",
    "type": "User"
  },

  // Key: "5262cf62-eb10-4fdd-87ca-716321405663"
  {
    "body": "Nostrum eligendi aspernatur enim repellat culpa.",
    "postedDate": "2017-02-02T16:19:45.2792288-05:00",
    "type": "Update",
    "user": "7fc5503f-2092-4bac-8c33-65ef5b388f4b"
  },

  // Key: "8d710b83-a830-4267-991e-4654671eb14f"
  {
    "body": "Autem occaecati quam vel. In aspernatur dolorum.",
    "postedDate": "2017-02-02T16:19:48.7812386-05:00",
    "type": "Update",
    "user": "c5f05561-9fbf-4ab0-b68f-e392267c0703"
  }
]

I decided to model 'friends' as a one-way relationship (like Twitter) for this example, which is why Matt Groves has Nic Raboy as a friend but not vice-versa. (Don’t read too much into this, Nic :).

The way to model this in C# could be:

public class FriendbookUser
{
    public Guid Id { get; set; }
    public string Name { get; set; }
    public virtual List<FriendbookUser> Friends { get; set; }
}

public class Update
{
    public Guid Id { get; set; }
    public DateTime PostedDate { get; set; }
    public string Body { get; set; }

    public virtual FriendbookUser User { get; set; }
    public Guid UserId { get; set; }
}

The Update to FriendbookUser relationship can be modeled as either a Guid or as another FriendbookUser object. This is an implementation detail. You might prefer one, the other, or both, depending on your application needs and/or how your OR/M works. In either case, the underlying model is the same.

Here’s the mapping I used for these classes in Entity Framework. Your mileage may vary, depending on how you use EF or other OR/M tools. Focus on the underlying model and not the details of the OR/M mapping tool.

public class UpdateMap : EntityTypeConfiguration<Update>
{
    public UpdateMap()
    {
        this.HasKey(m => m.Id);

        this.ToTable("FriendBookUpdates");
        this.Property(m => m.Body);
        this.Property(m => m.PostedDate);
        this.HasRequired(m => m.User)
            .WithMany()
            .HasForeignKey(m => m.UserId);
    }
}

public class FriendbookUserMap : EntityTypeConfiguration<FriendbookUser>
{
    public FriendbookUserMap()
    {
        this.HasKey(m => m.Id);

        this.ToTable("FriendBookUsers");
        this.Property(m => m.Name);
        this.HasMany(t => t.Friends)
            .WithMany()
            .Map(m =>
            {
                m.MapLeftKey("UserId");
                m.MapRightKey("FriendUserId");
                m.ToTable("FriendBookUsersFriends");
            });
    }
}

If, instead of storing these entities as separate documents, we applied the same denormalization as the shopping cart example and attempted to store a user and updates in one document, we would end up with some problems.

  • Duplication of friends: each user would store the details for their friends. This is not tenable, because now a user’s information would be stored in multiple places instead of having a single source of truth (unlike the shopping cart, where having the same item in more than one shopping cart probably doesn’t make any domain sense). This might be okay when using Couchbase as a cache, but not as a primary data store.

  • Size of updates: Over a period of regular use, an individual user could post hundreds or thousands of updates. This could lead to a very large document which could slow down I/O operations. This can be mitigated with Couchbase’s sub-document API, but also note that Couchbase has a ceiling of 20mb per document.

Note: There’s an N+1 problem here too (friends of friends, etc), but I’m not going to spend time on addressing that. It’s a problem that’s not unique to either database.

Additionally, it may not be the case that when the application reads or writes a user that it will need to read or write friends & updates. And, when writing an update, it’s not likely that the application will need to update a user. Since these entities may often be read/written on their own, that indicates that they need to be modeled as separate documents.

Note the array in the Friends field in the user document and the value in the User field in the update document. These values can be used to retrieve the associated documents. Later in this post, I’ll discuss how to do it with key/value operations and how to do it with N1QL.

To sum up, there are two ways to model data in a document database. The shopping cart example used nested objects, while the social media example used separate documents. In those examples, it was relatively straightforward to choose. When you’re making your own modeling decisions, here’s a handy cheat sheet:

Table 2. Modeling Data Cheat Sheet
If …​Then consider…​

Relationship is 1-to-1 or 1-to-many

Nested objects

Relationship is many-to-1 or many-to-many

Separate documents

Data reads are mostly parent fields

Separate document

Data reads are mostly parent + child fields

Nested objects

Data reads are mostly parent or child (not both)

Separate documents

Data writes are mostly parent and child (both)

Nested objects

Key/value operations

To get document(s) in Couchbase, the simplest and fastest way is to ask for them by key. Once you have one of the FriendbookUser documents above, you can then execute another operation to get the associated documents. For instance, I could ask Couchbase to give me the documents for keys 2, 3, and 1031 (as a batch operation). This would give me the documents for each friend. I can then repeat that for Updates, and so on.

The benefit to this is speed: key/value operations are very fast in Couchbase, and you will likely be getting values directly from RAM.

The drawback is that it involves at least two operations (get FriendbookUser document, then get the Updates). So this may involve some extra coding. It may also require you to think more carefully about how you construct document keys (more on that later).

N1QL

In Couchbase, you have the ability to write queries using N1QL, which is SQL for JSON. This includes the JOIN keyword. This allows me to, for instance, write a query to get the 10 latest updates and the users that correspond to them.

public List<Update> GetTenLatestUpdates()
{
    var n1ql = @"SELECT up.body, up.postedDate, { 'id': META(u).id, u.name} AS `user`
        FROM `sqltocb` up
        JOIN `sqltocb` u ON KEYS up.`user`
        WHERE up.type = 'Update'
        ORDER BY STR_TO_MILLIS(up.postedDate) DESC
        LIMIT 10;";
    var query = QueryRequest.Create(n1ql);
    query.ScanConsistency(ScanConsistency.RequestPlus);
    var result = _bucket.Query<Update>(query);
    return result.Rows;
}

The result of this query would be:

[
  {
    "body": "Autem occaecati quam vel. In aspernatur dolorum.",
    "postedDate": "2017-02-02T16:19:48.7812386-05:00",
    "user": {
      "id": "c5f05561-9fbf-4ab0-b68f-e392267c0703",
      "name": "Bob Johnson"
    }
  },
  {
    "body": "Nostrum eligendi aspernatur enim repellat culpa eligendi maiores et.",
    "postedDate": "2017-02-02T16:19:45.2792288-05:00",
    "user": {
      "id": "7fc5503f-2092-4bac-8c33-65ef5b388f4b",
      "name": "Steve Oberbrunner"
    }
  },

  // ... etc ...
]

N1QL allows you to have great flexibility in retrieving data. I don’t have to be restricted by just using keys. It’s also easy to pick up, since it’s a superset of SQL that SQL Server users will be comfortable with quickly. However, the tradeoff here is that indexing is important. Even more so than SQL Server indexing. If you were to write a query on the Name field, for instance, you should have an index like:

CREATE INDEX IX_Name ON `SocialMedia` (Name) USING GSI;

Otherwise the query will fail to execute (if you have no indexing) or it will not be performant (if you only have a primary index created).

There are pros and cons in deciding to use referencing or not. The values in friends and user are similar to foreign keys, in that they reference another document. But there is no enforcement of values by Couchbase. The management of these keys must be handled properly by the application. Further, while Couchbase provides ACID transactions for single document operations, there is no multi-document ACID transaction available.

There are ways to deal with these caveats in your application layer that will be discussed further in later blog posts in this series, so stay tuned!

Key design and document differentiation

In relational databases, rows of data (typically, not always) correspond to a primary key, which is often an integer or a Guid, and sometimes a composite key. These keys don’t necessarily have any meaning: they are just used to identify a row within a table. For instance, two rows of data in two different tables may have the same key (an integer value of 123, for instance), but that doesn’t necessarily mean the data is related. This is because the schema enforced by relational databases often conveys meaning on its own (e.g. a table name).

In document databases like Couchbase, there isn’t anything equivalent to a table, per se. Each document in a bucket must have a unique key. But a bucket can have a variety of documents in it. Therefore, it’s often wise to come up with a way to differentiate documents within a bucket.

Meaningful keys

For instance, it’s entirely possible to have a FriendbookUser document with a key of 123, and an Update document with a key of 456. However, it might be wise to add some more semantic information to the key. Instead of 123, use a key of FriendbookUser::123. The benefits to putting semantic information in your key include:

  • Readability: At a glance, you can tell what a document is for.

  • Referenceability: If you have a FriendbookUser::123 document, then you could have another document with a key FriendbookUser::123::Updates that has an implicit association.

If you plan on using N1QL, then you may not need keys to be this semantically meaningful. In terms of performance, the shorter the key is, the more of them can be stored in RAM. So only use this pattern if you plan on making heavy use of key/value operations instead of N1QL queries.

Discriminator fields

When using N1QL, another tactic that can be used in addition to or instead of meaningful keys is to add field(s) to a document that are used to differentiate the document. This is often implemented as a type field within a document.

{
    "address" : "1800 Brown Rd",
    "city" : "Groveport",
    "state" : "OH",
    "type" : "address"
}

There’s nothing magical about the type field. It’s not a reserved word within a document and it’s not treated specially by Couchbase Server. It could just as easily be named documentType, theType, etc. But it can be useful within your application when using N1QL to query documents of a certain kind.

SELECT d.*
FROM `default` d
WHERE d.type = 'address'

You may even take it a step further and add an embedded object to your documents to act as a kind of faux 'meta data':

{
    "address" : "1800 Brown Rd",
    "city" : "Groveport",
    "state" : "OH",
    "documentInfo" : {
        "type" : "address",
        "lastUpdated" : "1/29/2017 1:31:10 PM",
        "lastUpdatedBy" : "mgroves"
    }
}

That may be overkill for some applications. It’s similar to a pattern I’ve seen in relational databases: a 'root' table to simulate inheritence within a relational database, or perhaps the same fields tacked on to every table.

Conclusion of part 1

This blog post covered data modeling using denormalization, data modeling using referencing, key design, and discriminating fields. Modeling data in a document database is a thought process, something of an art form, and not a mechanical process. There is no prescription on how to model your data in a document database: it depends greatly on how your application interacts with your data.

You can get the source code for the entire blog series on GitHub now, parts of which were featured in this blog post. If you have questions about various parts of that code, feel free to leave a comment below, or open an issue on GitHub.

Stay tuned for the next blog in the series, where data and data migration will be discussed.

If you have any questions, please leave a comment below, contact me on Twitter, or use the Couchbase Forums.

This is a repost that originally appeared on the Couchbase Blog: A tour of the new Couchbase Web Console (video).

Earlier this month, we introduced Developer Builds. In this video, I take you on a quick tour of the new Couchbase Web Console.

If you have questions or feedback, please contact me at [email protected], or on @mgroves at Twitter, or just leave a comment below.

This is a repost that originally appeared on the Couchbase Blog: A tour of the new Couchbase Web Console.

Change is coming to the Couchbase Web Console that you know and love. But don’t worry, the old UI will still be available (for a while).

In this blog post, I’m going to take you on a tour of the new UI. I’ll be pointing out some of the differences and similarities. If you have anxiety about change, don’t worry: the purpose of this change is to improve usability, performance, and efficiency. The new UI gives Couchbase Web Console room to grow with new features that are coming down the road.

An important note!

This blog and the screenshots in it were taken from an early developer build. There may be other changes and improvements that show up by the time the release is in your hands, so the final product might be different. Feel free to point out any differences in the comments below.

Installation and Setup

The installation and setup process has not changed much, but it does get a fresh coat of paint. The installer itself appears the same (although the setup wizard is likely to be revised in future builds). Once the installer is complete, you’ll get redirected to a browser (if you’re installing Couchbase Server locally, this means a browser pointed to http://localhost:8091 will appear). Functionally, this part of the experience is the same as before, but it gets a new coat of paint.

Couchbase Server 5.0 Setup Screen
Figure 1. The setup screen forsCouchbase Server 5.0

After you click the "Setup" button, you’ll be taken through the installation wizard. Depending on which version you have been using, there may be some new options here that you haven’t seen. I’m not going to cover them in this post, but stay tuned for more blog posts about upcoming features in the latest releases.

Starting a new Couchbase cluster
Figure 2. Starting a new cluster in Couchbase Server setup

The sample buckets are still available. Note that these buckets (as always) are not password protected, and are meant for development only. Please check out the recent Advisory Note about Couchbase security.

Loading an optional sample bucket into Couchbase Server
Figure 3. Loading a sample bucket (optional) during Couchbase Server setup

You can also choose to create a bucket named "default" during setup. Again, this is not recommended for production (even if you put a password on it), since it’s a well-known bucket name that makes it a target. It’s also optional, you can click "Skip".

Optionally create a default bucket in Couchbase Server setup
Figure 4. Create a default bucket (optional) during Couchbase Server setup

Notification and Terms and Conditions are next. We are offering the full Enterprise edition in the developer build, so you can check out the Enterprise features.

Accept terms and conditions and sign up for notifications
Figure 5. Accept terms and conditions of the Enterprise Edition and sign up for notifications

Finally, create an admin user. Once again, I recommend not using "Administrator" as the user name in production, as it is a well-known default. Also, make sure to use a strong password.

Create administrator user in Couchbase Server setup
Figure 6. Create an administrator user for Couchbase Server

Using the new Couchbase Web Console

Once you’ve gone through the familiar install process, it’s time to see some of the substantive changes to the UI.

The first thing you’ll see is the dashboard screen, which has been streamlined.

New Couchbase Server Console UI
Figure 7. The new look of the Couchbase Server Web Console

Some things that jump out at me immediately:

The design. The new Couchbase Server UI is heavily influenced by Google’s Material Design. You will see more evidence of this as you navigate around the site. Material Design is meant to provide a "design language" that is geared toward "digital material" that can expand/change intelligently.

Main Navigation. The navigation is now vertical and on the left side of the page. Also notice that is is organized by "cluster" and "data".

Couchbase Console Main UI navigation
Figure 8. Main navigation is now vertical

Servers

Click on the "Servers" link to see the new look of the servers page.

Couchbase Servers list of nodes
Figure 9. The Servers page shows a list of nodes

This should look relatively familiar. Each node is listed here, with a list of services running on each node and system metrics. I only have one node in my example, but each node would be listed here in a production deployment. Notice that there are filters "Active Server" and "Pending Rebalance" that have a rounded highlight. Next to them are some buttons to manage servers and server groups which use rectangle shapes. These shapes help to provide visual cues no matter what the size of your screen is.

Security

Continuing the tour, click on the "Security" navigation link.

Couchbase Server Security
Figure 10. Couchbase Server Security UI

Not much different on this screen compared to the old UI, but I do want to draw your attention to the sub-navagation at the top: "Internal User/Roles", "Root Certificate", and "Audit". The secondary navigation across the site will be across the top of the page like this.

There are some new features coming soon for role-based security. I would expect the UI here to evolve in future versions to accomodate.

Query Workbench

As a developer, this is always my favorite part of the Couchbase Console, and the one I spend most of my time in. Besides the obvious design change, there are some minor improvements and changes here that I’d like to call attention to.

Couchbase Server Query Workbench
Figure 11. New design of the Query Workbench

No more Clear button. I use the clear button a lot, but my usage is probably atypical from a typical Couchbase user. The clear button is a frustrating button to hit accidentally while working on queries, so it’s been removed.

History. Click on "history" to see a list of all the queries that you’ve run. It’s searchable! Which can be very useful after a long day of query writing and data modeling. Remember that "clear" button? It’s here in the history popup; you can still access it, but you’re less likely to click it by accident.

Couchbase Query Workbench history
Figure 12. Query Workbench history with search

Data Bucket Insights. These have been moved to the right side of the screen. Personally, I think this is a better use of space. (This is an Enterprise Edition feature).

Plan and Plan Text options in results. By default, the queries you run will be EXPLAINed, and you can view the output of that in the Plan and Plan Text results. To turn that feature off, click the settings icon next to "Query Editor".

Couchbase Query Workbench Plan and Plan Text
Figure 13. Plan and Plan Text results tabs

Query Monitor. Notice the "Query Monitor" secondary navigation link at the top. This page shows you information about some of the system catalogs that were added in Couchbase Server 4.5.

Buckets

As a developer, I spend a lot of time in the Buckets section of the UI. The new version of this page isn’t wildly different, but I have found it a little snappier.

Couchbase Server Bucket UI
Figure 14. New Bucket management UI

Click on a row to expand information about the bucket (as well as to expose the Delete/Compact/Edit buttons).

Statistics and Charts

One significant area of change is the way that charts and statsitics are shown in the UI. Clicking a bucket name will still bring you to the analytics and information that you’re used to.

New Couchbase chart for N1QL requests
Figure 15. Chart that shows the number of N1QL requests

There aren’t any new charts that I’m aware of, but there have been changes made to improve usabilty of the charts as well as get them to adhere closer to the Material Design philosophy. They also take up the full space of the page, to maximize your view.

New Couchbase chart for HTTP requests
Figure 16. Chart that shows the number of HTTP requests

It’s difficult to demonstrate these changes in a blog post with static images (I may make a video walkthrough in the future), so I definitely recommend that you install the latest version of Couchbase Server 5.x and give them a try.

Why did you move my cheese!

Hopefully, these UI changes delight you and make your job easier. However, abrupt change can be difficult. This is why there is still an option to view the "Classic UI". Just click this link (at the top right of the page) and you’ll be albe to view the old UI. I don’t know how long the old UI is going to stick around.

Click Classic UI to go back to the old UI
Figure 17. Use this link to show the old "Classic UI"

To switch back to the new UI from the old UI, just click "New UI".

Click New UI to back to the new UI
Figure 18. Use this link to go back to the "New UI"

It’s likely that new features will only appear in the new UI.

Feedback and Summary

Stay tuned to the Couchbase Blog for information about what’s coming in the new UI in the next developer build.

I’ve given you the basic tour, but to really get a feel for the UI, I recommend you download and try it. Download Couchbase Server 5.0 today!

We want feedback! Developer releases are coming every month, so you have a chance to make a difference in what we are building.

Bugs: If you find a bug (something that is broken or doesn’t work how you’d expect), please file an issue in our JIRA system at issues.couchbase.com. Or, contact me with a description of the issue. I would be happy to help you or submit the bug for you (my Couchbase handlers give me a candy bar and pat me on the head every time I submit a good bug).

Feedback: Let me know what you think. Something you don’t like? Something you really like? Something missing?

In some cases, it may be tricky to decide if your feedback is a bug or a suggestion. Use your best judgement, or again, feel free to contact me for help. I want to hear from you. No suggestion is too small! The only stupid question is the one you don’t ask! The best way to contact me is either Twitter @mgroves or email me [email protected].

My job as a developer evangelist for Couchbase means than I work much less with SQL Server than I used to. However, it doesn't mean I don't keep up with it.

In fact, inspired by Couchbase, I decided to try out using SQL Server as a sort of document data store. SQL Server 2016 introduced some interesting new features that make this kinda possible: JSON_VALUEJSON_QUERY, and JSON_MODIFY.

I set up a "document" table, which is two fields: a guid and an nvarchar(max). This is kinda like a Couchbase bucket: a key and a JSON document to go with it.

I put fairly complex hierarchical documents in these fields, something like:

I say "fairly complex", because representing this in a standard normalized fashion would require at least two tables, foreign keys, constraints, and then data migration and schema migration as the model evolves.

Now, suppose I want to execute a query and find all the document that are "Show=true". With Couchbase and N1QL, I would just use something like "SELECT * FROM `bucket` WHERE show = true".

With SQL Server, there's a little more work. "SELECT t.key, t.doc FROM [table] t WHERE JSON_VALUE(t.SpeakingInfo,'$.Show') = 'true'". Notice that JSON_VALUE is being applied to a text field, and a JSON path is used within JSON_VALUE to get a specific value from within that JSON object.

For this simple project I'm doing, that's all I need. No idea yet what kind of performance level I can expect from JSON_VALUE and more complex JSON paths.

But, this is definitely an example of the kinds of database convergence I've been telling people about. The separations between NoSQL and SQL are becoming less strict, at least in terms of data modeling and querying.

You need to be using SQL Server 2016 or SQL Server Azure to take advantage of the JSON_* functions.

(This is a repost of content that was originally posted on the Couchbase Blog: Upcoming #Couchbase Events in Chicago)

I’m going to be in Chicago for most of next week. If you’re in Chicago and interested in NoSQL and Couchbase, now is a good chance to attend some sessions, visit some great user groups, and ask me questions in-person.

Couchbase in Chicago

I won’t be at Wrigley Field (the above image was doctored :), but here’s where I will be:

Three different sessions and three great Chicago groups. There will be some surprises in store, and I’m going to bring whatever stickers and swag that I can fit in my luggage with me.

If you're in Chicago, why not tweet me and say hi!

Matthew D. Groves

About the Author

Matthew D. Groves lives in Central Ohio. He works remotely, loves to code, and is a Microsoft MVP.

Latest Comments

Twitter